AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for The Woodlands Homeowners
When the furnace quits in the middle of a cold snap, you need a straight answer fast – not a sales pitch for a new system. Furnace repair in The Woodlands typically runs $150-$700, and our technicians have up to 11 years of experience working on the equipment people actually own here. We handle nine major brands, so we’re not guessing at unfamiliar components. Same-day service is available, and we offer free estimates with upfront pricing before any work starts. Call (866) 834-7590 and we’ll get a technician matched to your system. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Furnace Maintenance
Furnace Maintenance is the scheduled check that keeps a working system from becoming a repair call in January. In The Woodlands, furnaces sit idle through long humid stretches and then get worked hard when temperatures drop, so the first cold week often exposes problems that built up quietly – a dirty flame sensor, a blower that’s dragging, a filter nobody changed. We recommend a maintenance visit once a year, ahead of heating season, especially on systems more than a few years old. Wexford AC Repair inspects the heat exchanger, burners, blower, and flue, cleans what should be cleaned, and gives you a written report of what we found. Typical furnace maintenance runs $80-$200, and the written estimate sets the final price.
What a Maintenance Visit Covers
We check combustion, airflow, and electrical connections, then clean the burners and flame sensor. Filters get checked and swapped if they’re loaded up. You leave with a plain-language list of anything that’s wearing.
Why Annual Checks Matter Here
Mild winters mean a furnace can go a full year without running, and sitting idle lets dust, insects, and corrosion collect in the burner area. A check catches those before they turn into a no-heat call.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the systems that heat with refrigerant instead of a flame, and in The Woodlands a lot of homes run one year-round for both jobs. If your heat pump blows cool air in heating mode, runs constantly, or trips the breaker, that’s a repair call rather than something to wait out. We diagnose the reversing valve, defrost controls, compressor contactor, and refrigerant charge, then tell you what’s actually wrong before anything gets touched. Heat pump repairs typically fall within $150-$700, with the written estimate setting the final price. Wexford AC Repair works on heat pump equipment across the major brands, and because we also handle AC repair and installation, the same company looks after the system in both seasons instead of two contractors handing it back and forth.
Heating Mode Troubleshooting
When heating output drops, we check the reversing valve and defrost cycle first, since those are the usual culprits. Auxiliary heat stuck on is another common finding, and it inflates the bill quietly.
Refrigerant and Coil Checks
A low charge affects heating as much as cooling. We test pressures and look for leaks at the coils and line connections rather than topping off and hoping it holds.
Heating Repair
Heating Repair is the general service for any system that won’t warm the house, whether it’s a gas furnace, an electric unit, or a packaged system. Homeowners call us when the thermostat clicks but nothing happens, when heat runs for a few minutes and shuts off, or when one room never gets warm. The first step is a real diagnosis – not a parts guess. We test the thermostat, ignition sequence, airflow, and duct delivery to find where the heat is getting lost or blocked. Heating repairs typically run $150-$700 depending on the part and the access, and the estimate is free. We work on Carrier, Bryant, and American Standard equipment along with the rest of the major brands, and we stay repair-first: if the system can be fixed safely and sensibly, that’s the recommendation you’ll get.
Thermostat and Control Faults
Plenty of no-heat calls trace back to a thermostat, a control board, or a wiring fault rather than the furnace itself. We test the control circuit before pulling any major component.
Airflow and Duct Balance
A furnace that runs but doesn’t deliver heat often has a duct or blower problem. Restricted airflow shortens equipment life and can trip the high-limit switch repeatedly.
Boiler Repair
Boiler Repair covers hydronic heating – water or steam systems with a boiler, circulator pumps, and radiators or baseboards – and it’s a different trade skill than forced-air work. If your radiators stay cold at the top, the boiler short-cycles, pressure keeps drifting, or you hear knocking in the pipes, those are symptoms worth diagnosing rather than living with. Wexford AC Repair tests pressure and expansion tank charge, checks the circulator and zone valves, looks at the burner or elements, and confirms the relief valve is doing its job. Repairs typically land in the $150-$700 range, and the written estimate sets the final price. We treat boiler work with the same repair-first approach as everything else: find the fault, explain it plainly, and fix what’s actually broken.
Pressure and Expansion Problems
Pressure that climbs or drops points to the fill valve, the expansion tank, or a hidden leak. Getting the charge right protects the boiler from stress damage.
Zone Valve and Circulator Issues
Cold rooms alongside warm ones usually mean a stuck zone valve or a failing circulator. We test each zone separately to isolate it.
Gas Furnace Repair
Gas Furnace Repair is work on the fuel side of the system – burners, the gas valve, the igniter, the flame sensor, and the flue – and it’s the one area where you should never take a chance on a DIY fix. If you smell gas, get out of the house and call your gas utility first; once that’s handled, we can diagnose the furnace. Common symptoms we see are a furnace that lights and then shuts off, a yellow or lazy flame instead of a steady blue one, soot around the burner compartment, or a unit that won’t ignite at all. Gas furnace repairs typically cost $150-$700, and the estimate is free. Operating a gas appliance with a faulty heat exchanger or a blocked flue can put carbon monoxide into the house, so we test combustion and check the flue as a matter of course.
Ignition and Flame Sensor Faults
Modern furnaces use a hot-surface igniter and a flame sensor that proves the burner is lit. A dirty sensor is one of the most common no-heat causes, and it’s a quick, inexpensive fix.
Heat Exchanger and Flue Safety
A cracked heat exchanger is a genuine safety issue, not an upsell. We inspect it and check that the flue drafts correctly before calling any gas furnace job done.
Furnace Tune Up
Furnace Tune Up is the lighter, seasonal version of maintenance – a focused clean and adjust aimed at getting the furnace ready before the first cold front reaches The Woodlands. It’s the right call if the system worked fine last winter, you just want it checked and cleaned, and you’d rather catch a small issue now than a breakdown later. We clean the burners, check the ignition and flame sensor, verify the blower and airflow, inspect the flue, and test the safety switches, then report what we actually found. Furnace tune-ups typically run $80-$200, and the written estimate sets the final price. Our technicians aren’t paid on what they sell, so the report is what it is – good news included. Call (866) 834-7590 to book it before the season turns.
What Gets Cleaned and Adjusted
Burner ports, the flame sensor, and the blower wheel are the usual suspects. We also set airflow and confirm the filter is the right size and type for the system.
Reading the Report
You get a clear list of what’s fine and what’s wearing, with no pressure attached. If something needs watching, we’ll tell you what to look for.
Emergency Furnace Repair
Emergency Furnace Repair is for the no-heat calls that can’t wait for a routine appointment – a furnace that dies during a cold spell, a burning smell, or repeated lockouts. In a mild climate a cold night is still a cold night, and a house with no heat is a genuine problem for kids, older family members, and anyone with health concerns. Call (866) 834-7590. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. Repairs typically run $150-$700, with the written estimate setting the final price, and we don’t charge extra for a same-day call. We close on Saturday but answer the phone, so if the heat goes out over the weekend, we’ll have you first in line for Sunday. If you smell gas, leave the house and call your gas utility before anything else.
Signs It Can’t Wait
A burning smell, a gas odor, a furnace that repeatedly trips the breaker, or a carbon monoxide alarm all mean shut it off and call. These point to safety issues, not just a comfort problem.
What Happens When You Call
We ask a few questions about symptoms to match the right technician and parts. Then we set a clear window and a free estimate on arrival.
Brands We Service
We tune our diagnostics to how the equipment is actually built. Carrier and Bryant share a lot of design DNA, so a Carrier furnace diagnosis carries straight over to Bryant in most cases, and we know where those units tend to wear – the inducer motor and control board are familiar trouble spots. Trane and American Standard equipment has its own quirks, and our technicians know the parts that tend to fail first on each. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard systems, and each one gets a diagnosis based on how it’s built rather than a guess.
Because we’re brand-agnostic, there’s no bias toward one make when we recommend a part or a repair. The recommendation is based on your system’s condition, not a preferred vendor relationship. Whether you have Carrier, Trane, or any other make, we can help – and if the fix is simple, we’ll say so. Repair-first isn’t a slogan for us; it’s the reason we lead with repair in the first place.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- A burning or metallic smell. Any burning odor means shut the unit off at the thermostat and call. It can signal an overheating motor, a wiring fault, or a failing heat exchanger, and running it can make things worse.
- A yellow or lazy flame. A healthy gas flame is steady and blue. A yellow, drifting, or flickering flame can mean incomplete combustion, which is a carbon monoxide risk, so treat it as a stop-and-call situation.
- Repeated breaker trips or lockouts. A furnace that trips the breaker or shuts itself off over and over is telling you something is wrong. Ignoring it usually makes the eventual repair bigger.
- Cold air from the vents in heating mode. If the blower runs but the air is cool, the heat isn’t being made or delivered. On a heat pump that can mean a reversing valve or charge problem; on a furnace it’s an ignition or gas supply issue.
- Carbon monoxide alarm sounding. Leave the house and call the fire department or your gas utility first, then us. Never ignore a CO alarm, even once.
Our Process, Step by Step
- 1
Take your call and ask the right questions. We ask what the system is doing, how old it is, and what make it is, so we can match a technician who knows that equipment. You get a realistic window, not the runaround.
- 2
Diagnose before we touch anything. The technician tests the thermostat, ignition sequence, flame sensor, combustion, and airflow with a multimeter, a manometer, and a combustion analyzer where gas is involved. The goal is to find the actual cause, not to swap parts on a hunch.
- 3
Explain the finding plainly. You hear what’s wrong, what it will take to fix, and whether repair makes sense for the age and condition of the system. No pressure to replace when a repair will do.
- 4
Give you a written, upfront price. The estimate is free and the price is set per job by the written estimate. You approve it before any work begins.
- 5
Repair, test, and verify. After the repair, the technician runs the system through a full heat cycle, tests safety switches, and confirms combustion and airflow are where they should be. You get a summary of the work.
How Much Does Furnace Repair Cost in The Woodlands?
Furnace repair in The Woodlands typically runs $150-$700, and that spread reflects what’s actually broken. A typical flame sensor clean or igniter replacement sits at the low end of that range, since it’s a fast job with an inexpensive part. A typical blower motor or control board repair runs toward the middle and upper part of the range, because those parts cost more and the labor is deeper. A typical heat exchanger repair or a gas valve replacement is at the top end and may push above it depending on the part. A tune-up, if that’s all you need, is separate and runs $80-$200. Heat pump and boiler repairs fall within the same $150-$700 band.
What affects the price: the part itself, how hard it is to reach, the make of your system (some brands use pricier components), and whether more than one fault is present. Age matters too – a 15-year-old furnace may have several worn components at once.
How to avoid overpaying: get the diagnosis in writing, approve a fixed price before work starts, and be wary of anyone who jumps straight to replacement without testing the system. Repair-first shops should be able to tell you why a repair won’t work, not just that it won’t.
What’s included in a free estimate: the diagnosis, a plain explanation of the fault, a written fixed price for the repair, and an honest read on whether repair or replacement is the better call. The written estimate sets the final price.
Our Service Area Near The Woodlands
We work throughout The Woodlands and the surrounding communities – Spring just to the south, Katy and Cinco Ranch out west, and Houston neighborhoods like West University Place, Bellaire, Cloverleaf, Galena Park, and Mission Bend. If you’re not sure whether we reach you, call and ask. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving The Woodlands, TX – Our Local Coverage Area
We serve The Woodlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in The Woodlands
Furnace repair is the diagnosis and fixing of a heating system that isn’t working – ignition faults, blower failures, gas valve problems, thermostat and control issues, and heat exchanger concerns. It’s a repair-first service: we test the system, find the actual fault, and fix it rather than pushing a replacement. The estimate is free and the price is set in writing before we start.
Most common repairs – a flame sensor, an igniter, a thermostat, a capacitor – take under an hour once diagnosed. Parts-dependent jobs like a blower motor or control board can take longer if the part has to be sourced. We’ll tell you the expected time when we set the appointment. Call (866) 834-7590 for a free estimate.
Furnace repair in The Woodlands typically runs $150-$700 depending on the part and the access. A tune-up is separate at $80-$200. The written estimate sets the final price, and the estimate itself is free. Call (866) 834-7590 for an exact quote – estimates are free.
Yes – we service Carrier, along with Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Our technicians are experienced across all nine brands, so a Carrier inducer motor or a Trane control board isn’t unfamiliar territory. If you have a different make, call and ask.
Same-day service is available. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. We’re closed on Saturday. Call (866) 834-7590 to book.
Parts carry the manufacturer’s warranty where applicable, and we stand behind our work. Ask the technician to confirm the specific terms for your part before the repair starts, so you know what’s covered and for how long.
Clear access to the furnace, note the symptoms and when they started, and have the make and model handy if you can. Shut the system off at the thermostat if you smell gas or burning, and tell us at booking so we send the right technician.
Schedule Your Furnace Repair Service in The Woodlands Today
Don’t wait out a cold night with a dead furnace. Call (866) 834-7590 for a free estimate and an honest diagnosis from a technician who works on your make, not against it. Same-day service is available, with upfront pricing in writing. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s The Woodlands or a nearby community, cooling or heating – we handle both. Call (866) 834-7590.
Written by the team at Wexford AC Repair.